BlogGuidesBy Liam Doyle2 November 2026

How Do You Remove Chlorine From Your Shower Water in Australia?

Use a Flowpure shower filter, which reduces chlorine in your shower water. Reduces is the accurate word, because the filter lowers chlorine and does not promise to strip out every trace. If you want a shower upgrade built around one clear job, the Flowpure shower filter is the one I would pick.

What Does Removing Chlorine Actually Mean?

The word removing sounds absolute, so it helps to be precise. The Flowpure shower filter reduces chlorine in shower water, and that is the claim I am happy to stand behind. In my opinion, a plain statement of the job is worth more than a big number with no explanation, because a plain statement is something you can check. It tells you exactly what you are buying and what you should expect from the first shower onwards.

If you ever see a percentage quoted for any shower filter, ask which model it covers and what the test conditions were. A tidy figure with no report behind it tells you very little, while a test report that names the model and the conditions tells you a great deal. I would give that kind of document more weight than any headline number, and I would ask for it before ordering anything. Asking costs you nothing, and the answer makes the purchase easier to trust.

Why Is Chlorine Used in Australian Water?

Chlorine is used to disinfect Australian drinking water. The NHMRC Australian Drinking Water Guidelines say most Australian water utilities use chlorine as their disinfectant of choice. The WA Department of Health, in guidance last reviewed on 3 June 2022, says chlorinated drinking water is safe to drink. It gives a drinking water maximum of 5 mg/L for chlorine and typical Western Australian scheme supply levels of 0.5 to 1.5 mg/L. Those are guideline and regional figures, so they do not tell you what reaches your own showerhead.

So, the water is safe, and I say that plainly. In my opinion, safe is not the same as clean, and that gap is exactly where a filter earns its place. The NHMRC Australian Drinking Water Guidelines also say chlorine residuals and chlorination byproducts can produce distinctive tastes and odours. Chlorine is the part I can tie to the Flowpure shower filter with confidence, because reducing chlorine in shower water is the one job it is stated to do. That single, understandable benefit is why I would put one on the shower arm.

Is Chloramine a Different Question?

Chloramine needs its own question, because a chlorine reduction claim does not establish chloramine reduction. The WA Department of Health, in guidance last reviewed on 3 June 2022, explains that chloramination adds ammonia to chlorine so the disinfectant lasts longer in long supply systems. Some supplies therefore use chloramine rather than plain chlorine, and the two are not interchangeable in a buying decision. Ask your water supplier which disinfectant is used for your address, and keep the answer in writing next to your order details.

The Flowpure claim I am recommending is chlorine reduction, and I would not stretch it into a promise about chloramine. Keeping that boundary clear makes the purchase stronger, because the reason for buying stays easy to explain. If chloramine matters to you, ask for evidence that addresses it directly before you order, rather than assuming a chlorine statement covers it. You can still make a confident choice for Flowpure on its stated benefit while making sure the answers you collect match the questions you actually asked.

What Should You Check Before Ordering?

I would check three practical things before placing the order. First, confirm that the filter suits your shower, by sending a clear photograph of your shower connection and asking what fitting involves for that setup. Second, ask for the current price in Australian dollars. Third, ask for the maintenance requirements and ongoing costs of the exact model you are buying. I would want each answer in writing, because a photograph of someone else's bathroom is no guide to yours.

Then, request any available chlorine reduction test report, with the model identified and the test conditions stated. These are questions I would put to Flowpure rather than specifications I can promise on its behalf. In my opinion, having the answers together makes ownership easier to plan and gives the clear chlorine claim the attention it deserves. It also means you buy on facts you have seen, which is the sort of purchase that still feels right a year later.

Is the Flowpure Shower Filter Worth Having?

In my opinion, the Flowpure shower filter is worth having because reducing chlorine is a clear, understandable reason to filter shower water. I would pick it for that job and keep the recommendation focused there. Claims about skin, hair, water pressure or softening are not part of what I am arguing, and a good purchase should have a reason you can explain without borrowing benefits from somewhere else. Chlorine reduction gives this one a direct, honest purpose every time the shower runs.

Product card: Flowpure shower filter. It reduces chlorine in shower water.

My next step would be to gather the fitting confirmation, the maintenance details and the current costs, then choose Flowpure for its stated chlorine reduction. Keep those answers with your order so you have a practical reference when the filter arrives. Before you buy, photograph your shower connection and send it with your questions, so every answer you receive is about your shower and not a general one.

All articles