Carrito
Su carrito está vacío
Water Quality
Why 55,000+ households are dumping microplastic-filled water bottles, ditching $390+ plumber-installed filters, and switching to 0.1-micron tap ultrafiltration.
Who this is for
If more than two of these apply, this guide is written for you.
The frustration cycle
If you are a health-conscious homeowner or renter in Australia, you already know the tap water dilemma. Between PFAS headlines, microplastic warnings, boil-water notices and ageing mains, drinking straight from the tap feels like playing roulette with your health.
So you try to fix it, only to end up trapped in a cycle of frustration:
You unscrew your tap mesh expecting a built-in filter, only to find a gross, slimy buildup of trapped rust and gravel. Standard aerators do nothing against invisible chemicals, lead or microplastics.
It takes 10 minutes to filter a single glass, hogging fridge space, and only uses basic carbon that leaves fine microplastics and heavy metals behind.
You end up buying stacks of plastic water bottles at about 86c per litre, spending over $200 every month while lugging heavy crates up the stairs — only to drink water contaminated with nanoplastics shed directly from the bottle walls.
You look into under-sink systems, only to find they cost $390+ upfront, require $290+ in plumber installation fees, and drill permanent holes into a benchtop that cost you your rental bond if you rent.
Either way, you are overpaying to solve a problem that shouldn't cost more than pennies per glass.
Hidden health risks
Every one of these is targeted and reduced by FlowPure's multi-stage filtration.
Chlorine, specifically — what it does in the body: chlorine is added at the treatment plant to disinfect the supply, and it is still in the water when it reaches your glass. Beyond the swimming-pool taste and smell, it is linked to skin irritation, dry hair and eczema flare-ups; inhaled as steam it can aggravate asthma; and long-term exposure is associated with an increased bladder-cancer risk. It is also antibacterial by design — that is its job — but the same action can disrupt the balance of gut bacteria when you drink it every day.
Tap or click any card above for what each contaminant does — every line comes from the research behind our technology page.
The direct comparison
| Water / filtration source | Average monthly cost | Installation / friction | Microplastics & lead removal | Renter bond safe? |
|---|---|---|---|---|
| Plastic bottled water | $200 – $235 / month | Heavy carrying, 500+ plastic bottles in landfill/year | Contains nanoplastics shed from bottle walls | n/a |
| Jug / pitcher filters | $30 – $50 / month | Slow 10-min wait, takes up fridge space | Misses fine microplastics & heavy metals | Yes |
| Under-sink systems | $390+ upfront | Requires plumber, drilling & pipes | Varies | NO |
| FlowPure® Tap Purifier | ~$7 / month (23c/litre) | 30-second tool-free fit | 0.1-micron proprietary ultrafiltration | YES 100% |
Our recommendation
304 stainless steel housing · independently lab tested
How it works
Most cheap plastic filters only use basic granular carbon that removes chlorine taste while leaving toxic heavy metals, lead and microplastics behind. FlowPure® combines Activated Carbon with Ultrafiltration:
Adsorbs chlorine, chemical tastes and odours, pesticides and the organic compounds that make tap water taste "off".
Filters down to 0.1 microns — 2,000× finer than a Brita Maxtra jug — blocking bacteria, viruses, microplastics and nanoplastics.
Unlike reverse osmosis, the beneficial minerals your body needs stay in the water.
What it targets and removes: lead · excess fluoride · chlorine · microplastics & nanoplastics · PFAS, PFOA & forever chemicals · THMs (trihalomethanes) · bacteria & viruses · arsenic · selenium · pesticides — and more.
Certified and tested to remove up to 99% of impurities. NSF 42 & 53 certified. Independently lab-tested. Voted best-tasting water in blind tests against 8 top filtration systems.
| Contaminant | How FlowPure removes it | Tested reduction |
|---|---|---|
| Chlorine & odour | Activated carbon adsorption | 98–99% |
| Sediment, rust & sand | Mechanical micropore filtration | 99% |
| Lead | KDF electrochemical reduction | 95–99% |
| Heavy metals | KDF + dedicated media | 95–99% |
| Microplastics | 0.1-micron ultrafiltration membrane | up to 99% |
| Bacteria & cysts | Multi-barrier filtration | 99% |
| VOCs | Activated carbon adsorption | 60–80% |
The result? Pure, crisp, great-tasting water for under 23c per litre — while retaining all the essential natural minerals (calcium and magnesium) your body needs.
Overcoming every tap objection
All testing conducted by accredited independent laboratories. Click any report to view the full document.
NSF Test Report
NSF Evaluation Report
CE Compliance Certificate
RoHS Safety Test Report
FDA Material Safety Report
Certain proprietary and supplier-specific information has been redacted for confidentiality. Full results are available upon request.
Try FlowPure todayCertificate
Verified proof
"I was spending nearly $60 a week buying plastic bottled water for my family because our tap water tasted like a swimming pool. FlowPure paid for itself in less than two weeks."
Verified customer"When I unscrewed the casing after 90 days, the white ceramic filter was coated in brown rust and gunk. To think my kids were drinking that before FlowPure…"
Verified customerThe doc supplies two customer reviews for this page. This third card is here so the row stays balanced — send me a third review and I will drop it straight in.
Placeholder · awaiting content🎁 Exclusive reader offer
Limited-time offer: 50% off + 2 free replacement filters
Stop wasting $200+ a month on plastic bottled water or risking your bond with expensive plumbers. Claim FlowPure®'s current promotional campaign offer below.
Stock is limited due to high ad demand. Discount applied automatically at checkout.
Common questions
