Filtre de robinet en acier inoxydable
- Unscrew the aerator from the end of your tap.
- Pick the adapter from the box that matches your tap’s thread.
- Screw the filter on by hand, turn the water on and check for drips.
Installation guide
Fitted in about two minutes.
No plumber and no drilling. Watch the short video for your filter, screw it on, and you’re done. Everything you need is in the box.
Watch, then fit.
Each video takes you through it from the box to the first glass.
Filtre de douche
- Unscrew your shower head from the hose.
- Screw the filter onto the hose, then the shower head onto the filter.
- Run the water for a minute and check the joints are hand tight.
Will it fit my tap?
Most taps with a round aerator fit straight away. If yours is different, there’s an adapter for it.
Adapters in the box
The tap filter comes with thread adapters for the common tap sizes, male and female.
Pull-out and odd sizes
We also sell a pull-out tap adapter and thread adapters from 16 mm to 24 mm.
See adaptersNot sure? Check in 15 seconds
Answer a few quick questions about your tap or shower and we’ll tell you how it fits.